Concrete Corrosion Monitoring Meter
Transformer Rectifier
A small-amplitude sine wave is used to excite the three electrodes of the probe embedded in the concrete, and the response current signal of the working electrode (WE) is monitored at the same time.
Description:
A small-amplitude sine wave is used to excite the three electrodes of the probe embedded in the concrete, and the response current signal of the working electrode (WE) is monitored at the same time. The polarization resistance Rp of the electrode and the corrosion rate of the electrode can be calculated by the built-in software.
Using high-frequency small-amplitude sine waves to polarize two oppositely installed stainless steel electrodes buried in steel bars, and measure the concrete resistivity between the two electrodes.
Application Field:
Bridge tunnel, reinforced concrete corrosion monitoring.
Similar Products
AC Impedance Corrosion Testers are suitable for corrosive environments with high dielectric resistance, such as petrochemical, building bridges, and underground…
Used to monitor the carbonization rate of the surface mortar layer of concrete structures such as buildings and bridges, and…
A small-amplitude sine wave is used to excite the three electrodes of the probe embedded in the concrete, and the…
Corrosion Coupon is a simple and very effective tool that gives a quantitative estimate of corrosion rates that take place…
ER Corrosion Probes are suitable for monitoring the total corrosion amount and corrosion rate of metals in gas phase, liquid…
Intelligent Test Pile is an electrical equipment and is mainly used for on-line monitoring of cathodic protection potential by collecting…
This DC powered Transformer Rectifier is capable of remote controlling and data transmission. Intelligent Transformer rectifier is DC power sources…
Cathodic Protection Remote monitoring system (RMS) can improve the level and efficiency of CP system management by reducing the need…
